An electric wheelchair or scooter is a disabled person’s only means of getting around. It might look like a simple device but that is not the case as every electric wheelchair and mobility scooter has complicated electronics and mechanical parts. As these parts on a power wheelchair and mobility scooter have movement there is wear and tear involved and if these factors are not maintained on a regular basis, the disability device will break down, or not do as it was designed.
|
Price : 49999 |
Regular maintenance on your
electric wheelchair or mobility scooter is vital to keep it in tip-top running order and prevent unnecessary breakdowns. The maintenance of mobile devices should be done on a regular basis, depending on the usage. We recommend a service to be done at least every six months to identify any issues before it becomes a breakdown. A full service on a power wheelchair or electric scooter must be done once a year to ensure the power wheelchair or scooter perform optimally. When performing a service on power wheelchair or scooter attention must be given to the following:
Bearings – there are few bearings on all power wheelchairs that need to be inspected and replaced.
These bearings are located on the castor wheels of the power wheelchair. Bearings pick up dust and dirt in the normal everyday use of the
power wheelchair and can become stuck and will cause the castor wheel to become sticky and not turning. These bearing should be replaced when this happens. On an electric scooter, the bearings are located in the front wheels and the can also become dirty and sticky which will cause the wheel to become stuck or noisy. Batteries – all power wheelchairs and electric scooters are equipped with at least 2 x 12Volt batteries. This is the power source of the power wheelchair and electric scooter. Just like any battery, these batteries have a limited lifespan of 1 to 5 years depending on the usage of the power wheelchair or electric scooter. The lifespan is determined by charging cycles.
|
Price : 47999 |
If the battery indicator on the control display indicates yellow, it will reduce the amount of available
cycles in the battery by 2 and if it indicates red it will reduce by 3 cycles when charged. When the power wheelchair or electric scooter starts performing sluggish or the batteries power does not last as long as always this is the indication that the batteries need to be replaced. Electronics – both power wheelchairs and electric scooters are equipped with power modules that control the power wheelchair and electric scooter. During routine services, the power wheelchair and electric scooter wiring must be visually inspected for chafing or ant breakages.
The wire connectors must also be inspected to ensure all connections are still secure in place. A loose
the connection can cause the power wheelchair or electric scooter to stop working. Wires that short circuit can blow the power module on the power wheelchair or electric scooter and cause it to stop working. Replacing a blown power module on any power wheelchair or electric scooter can be very costly and also cause downtime. Structural – during the service of a power wheelchair or electric scooter it is vital to inspect the frame and ensure structural integrity is still in order. Cracks in the frame of the power wheelchair or electric scooter can cause the power wheelchair or electric scooter to break and cause serious bodily injuries. These structural issues must be repaired immediately if they can be repaired.