Wheelchair India : Handicap Products : Online Shopping

User Manual for Vissco Zip Lite Power Wheelchair

Wheelchair India

Address: 77-78, Bhagirathpura, Near Bharat Life Style Furniture, MR 4, Indore, Madhya Pradesh 452003

Email: info@wheelchairindia.com, mswindore@yahoo.com

Mobile: +91-9893025003

Mobile: +91-7772818883

Buy Online Click Here - Vissco Zip Lite Power Wheelchair

Clutch

For convenience, your wheelchair has two mechanisms. The drive and freewheel mechanism. It changes through the clutch.

The drive/freewheel mechanism is situated to the motor. These levers will allow you to disengage the drive mechanism and have the wheelchair in freewheel mode. Always

Leave in drive mode, the freewheel facility is there only to allow the chair to be pushed manually when the need arises(i.e., to store or push a tight space).

1. there is one clutch in each of motor.

2. turn to inside and parallel with the motor is in the drive mode.

3. turn to the outside is in the freewheel mode.

Joystick

The joystick can be also changed from right to be left-hand drive. The joystick is can be extended and shortened, you can take the following way.

Footrest Plate

You can adjust your footrest up and down when it is not suitable for yourself

Please adjust the extension tube through the screw in the tube.

Taking off: To push the handle, makes it separated from the chair then turn the footrest outward and lift it up, it can be easy take-off.

Fixing Up: It is the reverse step of the Taking off.

Charger

When you want to charge your Zip Lite please make sure the power is turned off and the freewheel levers are in the drive position. Please insert B port insert your power supply hole. And please insert the A end into the charger port in the controller

Attention: VISSCO advise all the users to use the VISSCO charger, the different charger may cause the person to injure or hurt the battery.

The wheelchair is designed to assist in your individual mobility needs. Any usage outside which do not obey this manual may result in damage to the chair or injury to the user or third party.

1. Do not lift the wheelchair by the armrests

2. Do not lift the wheelchair by the footrest brackets

3. You can program the controller in conjunction with your supplier to fine-tune the wheelchair performance characteristics.

The VISSCO wheelchair is designed to operate on two Ul (2 x 35 Ah) gel, or sealed lead acid, maintenance-free batteries. Since they are scaled, there is no need to check the electrolyte(fluid) level.

Charging.

One example of the indicator light on the charger gives advice as follows:

• Red - Power on

• Amber - Battery charging

• Green - Charging complete

Please refer to the LED indicator description based on the charging status of the charger.

1. The active user will need to charge the batteries after using approximately more than 30% of battery capacity. As an inactive user, only using from once a week to every other day, the recharge point would be at 50% of the discharge.

2. In only using for a short distance each day, it is advisable to charge at the end of each week.

Batteries should be kept fully charged at all times. They must not be left in a discharged state if not using the unit for some UMC. The batteries should be checked once a month and recharged as needed. To recharge the, connect the charger to the Charging Port at the front of the VSI on the charger.

ATTENTION. • Do not leave the charger plugged into the Charging Port if the charger is not charging. This charger is for indoor use only.

• Do not expose it to rain or water spray.

• Do not cover the battery charging pole.

• Always keep the battery dry, never to use it deeply output, and never to charge it more than 12 hours.

How to improve the using of the battery.

1. Please charge the battery before you first using. Usually, this time needs 8-10 hours.

2. Please make sure you have used all the power before the second charging. Then to charge it for 8-11 hours.

3. Please make sure to cycle that for 5 times, so that your battery is in the deeply cycle, can be used for long life.

4. A deeply cycle of the battery can protract the battery life. So stunt people charge it ruleiessly, or store it without charge. may hurt the battery, so the life is short than others.

Battery Installation.

1. Cut off the power

2. Make sure the Zip Litt is in the drive mode.

3. Cut the connection between the controller and the battery case

CONTROLLER

Operation of the controller.

1. On-Off Button: This button turns the joystick controller (hereinafter referred to as VSI) on and off. Do not use this button to stop them, except in an emergency.

2. Battery display: This is a 9-segment display, which indicates if the VSI is switched on and gives the state of charge of the battery. (from left to right 2 red bars, 3 amber bars and 4 green bars means battery full)

3. Maximum Speed Indicator: This is a 5-segment display, which indicates the maximum speed setting selected.

4. Horn Button: This button operates the wheelchair horn.

5. Speed Decrease Button: This button decreases the maximum speed.

6. Speed Increase Button: This Button Increases the maximum speed.

7. Joystick: This controls the speed and direction of the. Push the joystick in the direction you want to go. The further you push it. the faster the speed will be. Releasing the joystick will automatically engage the brakes and stop them.

8. Charging Port for Off-Bord Charger: Only plug into this port with the qualified charger certified by the original manufacturer of the. The port should not be used as a power supply for any other electrical devices. The behavior against the two statements above will void the warranty of them. The controller can be fitted to suit either right or left-handed users.

VILCONTROLER

Fault solving of the controller.

The Self-Help Guide (Table I) is intended to assist in the location of a fault that may occur in a certain part (tithe. If after checking out the fault from the table below and the fault is still showing, do not use them. Turn off the power and consult your provider immediately.

TABLE

BATTERY GAUGE	POSSIBLE FAULT	SOLUTION
Controller alarm 2 times first, then 7 times	Turn on controller but joystick did not return to the neutral position	Put joystick return to the neutral position,then turn . controller
Controller alarm 9 times and 9 Bars lighted	Possible controller fault or voltage is too low	Contact with provider or charge the battery
Controller Mart. times .d 8 Bars lighted	Possible controller fault	Contact with provider
Controller alarm 7 times and 7 Bars lighted	Possible joystick fault or disconnected	Put joystick return to the neutral position or connect plug tightly
Controller alarm 6 times and 6 Bars lighted	Possible controller over current	Turn off controller the restart
Controller alarm 5 time and 5 Bars lighted	Right-hand brake fault or disconnected	Reconnect plug
Controller alarm 4 times and 4 Bars lighted	Right-hang motor disconnected	Reconnect plug
Controller alarm 3 times and 3 Bars lighted	Left-hand Make fault or disconnected	Reconnect plug
Controller alarm 2 times and 2 Bars lighted	Left-hand motor disconnected	Reconnect plug
Controller alarm 1 time and 1 Bar lighted	Low battery voltage	Charge the battery

USING THE

Your wheelchair is made up of two main parts.

1. The seat part: different kinds of the scat arc design for the requirement of the VISSCO set of the footplate and other small parts.

2. The driving parts: it is the best important of the Zip Lite contains the controller, motor with gearbox battery, a set of the front wheel, the rear wheel, and the anti-wheel.

1. Armrest

2. Joystick Controller

3, Charging Port

4. Scat

5. Standard Swing Away Leg rest

6. Front Castor (8" PU tire)

7. Rear Drive Wheel wide pneumatic urc,

8. Anti-tip Wheel 9.Push Handle (foldable for compact storage and transportation)

Frame	Folding spraying steel frame
Rear Wheel	12" PU tyre
Front Caster	8" PU tyre
Armrest	flip-up armrest with soft PU pad
Side Panel	plastic
Backrest/seat	detachable soft sandwich mesh fabric cushion, double layers
Footrest	swing-away, detachable
Safety Belt	yes
Max. User weight	125kg
Max. Speed	6km/h
Distance per Charge	12km
Climbing Ability	8
Battery	24V/I 2AH, lead-acid battery
Motor	250wx2, without electromagnetic brake, its stop rein on the resistance Rear Wheel 12" PU tyre
Controller	homemade controller with a joystick, it can be changed for left hand operation
N.W/G.W	40.4x44.9kg
Package	(IPC/carton, 720450820mm)
Overall Lenght	106cm
Overall height	96.5cm
Overall Width	62cm
Back height	55cm
Seat Height	55cm
Seat Depth	44cm
Seat Width	44.5cm
Folded Width	37cm
Armrest Height	72cm